Boiler Supplier

We have long known that fast boiler this brand, high-tech enterprises in Henan Province, the most influential brand, technology entrepreneurs contribution to enterprise and many other honors, so that our brand is very interested in each other fast. Through this collaboration, proving once again that our decision is not wrong, 15 tons of steam condensing gas boiler provides steam to fully meet the needs of our dairy products processing plant. --customer feedback

You have to know the energy consumption of the boiler (main steam temperature) reason for the main steam temperature problems (1) the following main steam temperature increases on 1.1 furnace boiler flame center shift, furnace outlet temperature. 1.2 coal increased too fast. 1.3 coal volatiles reduced, thicker coal, water increases. 1.4 Excess air amount is increased. 1.5 pulverizing system start-stop. 1.6 improper adjustment of automatic control by warm water. 1.7 superheater sootblowing poor choice. 1.8 feed water temperature is low. (2) The following main steam temperature decreases the flame center biasing 2.1: burner tilt deviation, hem; burner is switched from the upper to the lower layer, the lower layer or to an excessive amount of the powder. 2.2 coal volatiles increased, thinning coal moisture reduction. 2.3 superheater heating surface fouling, slagging, fouling the interior. 2.4 boiler drum water separation is poor. 2.5 Save the hot water drain valve. 2.6 automatic adjustment inappropriate, excessive desuperheating water. 2.7 furnace or serious deterioration of water quality of soft drinks were vacated, occur. 2.8 feedwater temperature. 2.9 economizer and water wall inappropriate choice sootblowing time. 2.10 coal reduced too quickly.

First, the first own specific needs and boiler manufacturers use to inform and get him to recommend some suitable gas boiler equipment;

The feed water of the horizontal boiler should be in line with the stipulation of the GB/T1576-2008. In the heating period,the user should check the water quality at least one time,including the turbidity, the hardness and the PH, the oil content, the iron content. The results should be recorded and filed. This inspection should be conducted by the authorities authorized by the province-level safety supervisory organs.